Mutiara Sanjaya

sql
ECOAIR HEATLESS REGENERATED AIR DRYERS
ECOAIR HEATLESS REGENERATED AIR DRYERS
Hover to Zoom

02 Oct 2019
China
1 unit
IDR CALL

Specification of

ECOAIR HEATLESS REGENERATED AIR DRYERS

CWPH - Heatless Regenerated Dryer (120-1800 cfm)
A heatless desiccant dryer is frequently the best selection for drying small quantities of air to a -40°F or-100°F dew point, or for drying intermittent flows. Also, due to the nature of the unit, heatless dryers can be very useful in hazardous areas.
Heatless dryers have the following advantages over heated types:
1) Lower original cost than heat reactivated units
2) Require no high voltage power (saves on electrical installation and service expenses)
3) Operates at low temperatures
4) Not a fire or safety hazard
The CWPH units find applications in general industry, mines, process industries, off-shore platforms and drilling rigs. The CWPH dryer is best suited to large volume users of very dry air. the CWPH can be customized to best match end user requirements. The CWPH is designed for simple operation and maintenance.
– High strength 1/4” activated alumina.
– A high-efficiency (HC) coalescing filter is factory-mounted on the dryer package or shipped loose for field mounting. The compressed air is pre filtered prior to entering the dryer's drying vessel to collect any contaminants such as dirt, water or oil droplets from the upstream compressor. The filter has a 0.01 micron and 0.01 ppm rating.
– A particulate, (HT) filter is factory-mounted on the dryer package or shipped loose for field mounting. The compressed air is filtered downstream from the drying vessel to collect any dusting that may have occurred as a result of the drying process. The filter has a 1.0 micron rating.
– Supplied on the prefilter of every dryer, this is a mechanical float operated drain valve. A no-loss drain or electronic drain can be provided as a shipped-loose option. Larger dryers are equipped with automatic drain valves.
– These are included on pre- and afterfilters to monitor the condition of filter elements.
* For maximum energy efficiency it is recommended to change prefilter and afterfilter elements every year or when they indicate restricted flow.
– Of welded steel construction, all CWPH models are GB or ASME code stamped. Removable stainless steel screens are provided in the inlet and outlet nozzles of each desiccant tower to prevent carry-over of desiccant. Accessible fill and drain ports.
– 2-1/2” or 3-1/2” dial, 0-300 psig, brass bourdon tube mounted on each vessel for ease of visibility.
– A fire-coded safety valve is located on each desiccant chamber. It is set for 165 psig.
-
High-performance non lubricated diaphragm valve
Normally open inlet valve
Normally closed exhaust valves
Integrated pilot air circuits.
All models use a high performance, steel bodied check valve with aluminum internals and a silicon seat.
– A NEMA 4 Microprocessor Controller with integrated keypad interface is standard. Includes a dryer schematic with visual indications of: dryer on, dryer alarm, left/right tower drying and left/right tower regeneration.
– NEMA 4 is the standard enclosure. Constructed in accordance with UL/ULC 508A.
– Fully assembled on self-supporting fabricated steel frame.
– A purge adjustment valve is included with a mounted purge pressure gauge.
- One for each purge air outlet.
1” to 6” Schedule 40, SA53 Gr. B ERW carbon steel pipe.
1” to 2” uses threaded 150# black malleable iron fittings.
3” to 6” flanged and welded fittings. ANSI B16.5 Class 150 raised face flanges.

 

Kompresor angin

Ulasan

/5
Ulasan
5
4
3
2
1

Foto dari Pembeli

Ulasan dari Pembeli

Filter
Semua
Dengan Foto
5
4
3
2
1
Telepon
Request a Quote
Produk Siap di Pesan
Rp 0
1
Bendera Indonesia Indonesia  |  Bendera Inggris English
Ingin menghubungi kami?
Klik tombol dibawah
Logo IDT
Chatbot